CCNA MCQ Quiz and Online Test

Results

Congratulation…
You Have Passed The Test, You Should Try To The Next One…!!

Rate this post

Unfortunately…
You Did Not Pass. Why Not Try It Again?

Rate this post

#1. Which command would you use to apply an access list to a router interface?

ip access-list 101 out

access-list ip 101 in

ip access-group 101 in

access-group ip 101 in

#2. You want to create a standard access list that denies the subnet of the following host: 172.16.198.94/19. Which of the following would you start your list with?

access-list 10 deny 172.16.192.0 0.0.31.255

access-list 10 deny 172.16.0.0 0.0.255.255

access-list 10 deny 172.16.172.0 0.0.31.255

access-list 10 deny 172.16.188.0 0.0.15.255

#3. You want to create a standard access list that denies the subnet of the following host: 172.16.144.17/21. Which of the following would you start your list with?

access-list 10 deny 172.16.48.0 255.255.240.0

access-list 10 deny 172.16.144.0 0.0.7.255

access-list 10 deny 172.16.64.0 0.0.31.255

access-list 10 deny 172.16.136.0 0.0.15.255

#4. Which of the following commands connect access list 110 inbound to interface ethernet0?

Router(config)#ip access-group 110 in

Router(config)#ip access-list 110 in

Router(config-if)#ip access-group 110 in

Router(config-if)#ip access-list 110 in

#5. What command will permit SMTP mail to only host 1.1.1.1?

access-list 10 permit smtp host 1.1.1.1

access-list 110 permit ip smtp host 1.1.1.1

access-list 10 permit tcp any host 1.1.1.1 eq smtp

access-list 110 permit tcp any host 1.1.1.1 eq smtp

#6. What will the result of this access list be?

E-mail and Telnet will be allowed out E0.

E-mail and Telnet will be allowed in E0.

Everything but e-mail and Telnet will be allowed out E0.

No IP traffic will be allowed out E0.

#7. Which of the following series of commands will restrict Telnet access to the router?

#8. Which of the following is true regarding access lists applied to an interface?

You can place as many access lists as you want on any interface until you run out of memory.

You can apply only one access list on any interface.

One access list may be configured, per direction, for each layer 3 protocol configured on an interface.

You can apply two access lists to any interface.

#9. You are working on a router that has established privilege levels that restrict access to certain functions. You discover that you are not able to execute the command show running-configuration. How can you view and confirm the access lists that have been applied to the Ethernet 0 interface on your router?

show access-lists

show interface Ethernet 0

show ip access-lists

show ip interface Ethernet 0

#10. According to the graphic above, which interface of which router, and in which direction, should the access list be placed to prevent accounting users from accessing the network attached to the E0 interface of Lab_B?

Lab_A, E1 in

Lab_A, E1 out

Lab_B, E0 out

Lab_B, E0 in

CHECK ANSWER